Intended Use; Environmental Conditions; Service Life; Explanation Of Warning Symbols - Ottobock 6A30-20 Instrucciones De Uso

1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

2 Intended use

2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
The product is embedded in the prosthetic socket and is no structural com­
ponent. The maximum body weight is determined by the prosthetic socket's
laminate and the prosthetic components used.
For use with 5R2
Approved for a body weight of up to 125 kg.

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Storage and transport conditions: -10° C to +60° C, relative humidity: no restrictions
Humidity: fresh water, salt water – cleaning and drying is required after contact and
use.
Allowable immersion depth: 1 m
Unallowable environmental conditions
Sauna, extreme watersports
Mechanical vibrations or impacts
Perspiration, urine, acids or bases
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service life

Depending on the patient's level of activity, the service life of the product is
3 to 5 years.
3 Safety

3.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION
13