Safety Information - Amprobe 34XR-A Manual De Uso

SYMBOLS
Battery

�
Double insulated
�
Direct Current
�
Alternating Current
�
Complies with EU directives
 Fuse

Safety Information

• The 34XR-A Digital Multimeter is UL, cUL, and EN61010-1 certified
for Installation Category III – 600V and Category II – 1000V. It is
recommended for use with local level power distribution, appliances,
portable equipment, etc, where only smaller transient overvoltages may
occur, and not for primary supply lines, overhead lines and cable systems.
• Do not exceed the maximum overload limits per function (see specifications)
nor the limits marked on the instrument itself. Never apply more than 1000V
dc/750 V ac rms between the test lead and earth ground.
• Inspect the DMM, test leads and accessories before every use. Do not use
any damaged part.
• Never ground yourself when taking measurements. Do not touch exposed
circuit elements or test probe tips.
• Do not operate the instrument in an explosive atmosphere.
• Exercise extreme caution when: measuring voltage >20V // current >10mA
// AC power line with inductive loads // AC power line during electrical
torms // current, when the fuse blows in a circuit with open circuit voltage
>1000 V // servicing CRT equipment.
• Always measure current in series with the load – NEVER ACROSS a voltage
source. Check fuse first. Never replace a fuse with one of a different
rating.
• Remove test leads before opening the Battery Cover or case.
�
Refer to the manual
�
Dangerous Voltage
�
Earth Ground
R
Audible tone
Underwriters

Laboratories, Inc
1