Taurus PROFESSIONAL 2 PLUS Manual De Instrucciones página 14

must be replaced. Take the appliance
to an authorised Technical Assistance
Service In order to prevent any danger,
do not attempt to dismantle or repair it
yourself.
- Ensure that the voltage indicated on the name-
plate matches the mains voltage before plugging
in the appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not use
plug adaptors.
- Do not force the electrical wire. Never use
the electric wire to lift up, carry or unplug the
appliance.
- Do not wrap the cable around the appliance.
- Do not allow the connection cable to hang or
to come into contact with the appliance's hot
surfaces.
- Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- This appliance is not suitable for outdoor use.
- Keep the working area clean and well lit. Clutte-
red and dark areas invite accidents.
-Do not force the electrical wire. Never use
the electric wire to lift up, carry or unplug the
appliance.
-Do not use or store the appliance outdoors.
Use and care
- Fully unroll the appliance's power cable before
each use.
- Never connect the appliance without having first
of all filled the oil bowl
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not move the appliance whilst in operation
or if the oil is still hot. Once cooled, transport the
appliance using the handles. (Fig.
- Use the appliance handle/s, to catch it or move
it.
- Do not turn the appliance over while it is in use
Manual Professional 2 Plus.indb 14
or connected to the mains.
- Respect the MAX and MIN levels
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not store or transport the appliance if it is still
hot.
- Never leave the appliance unattended while in
use.
- Never leave the appliance unattended when in
use and keep out of the reach of children, as this
is an electrical appliance that heats oil to high
temperatures and may cause serious burns.
- If fat is used instead of oil, melt first in a separa-
te recipient.
- If fat has hardened in the tank, make a few
holes in the solid fat in order to allow the water,
which has been retained in the fat to be released
as steam when heated at the minimum thermos-
tat temperature.
- If, for some reason, the oil were to catch fire,
disconnect the appliance from the mains and
smother the fire using the lid, a cover or a large
kitchen cloth.. NEVER WITH WATER.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron is
switched off permanently.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Oil filling:
- Open the cover.
- Ensure that the electrical equipment is appro-
priately positioned.
- Pour oil up to the mark indicating the MAXIMUM
level on the bowl.
- The appliance must not be used with less oil
than that indicated by the MINIMAL mark.
Use:
- Take the length of cable required out of the
housing.
- Connect the appliance to the mains.
- Remove the lid. This fryer is not designed to fry
20/6/16 15:31