Attach the Shoulder Strap
Peel off the pad and thread the
end of the strap through the
eyelet.
Eyelet
Grip Adjustment
Open the pad and make grip adjustments.
• Before making the adjustment, remove any security tags that may be attached to the velcro.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket
and stud hole on the camcorder. Then tighten the screw clockwise.
• Some tripods are not equipped with studs.
Thread the strap through the
buckle, adjust its length, and
use the strap guide to fi x it in
place.
Strap Guide
Buckle
BATT
Getting Started
Position the buckle near the
eyelet and reattach the pad.
7
EN