7.10.2 Using the internal teletext decoder
As an alternative, you can use the integrated teletext decoder to display the information.
>
Switch to the programme for which you want to view teletext information.
Press the TXT button to access the teletext.
>
Use the number buttons to enter the number of the desired teletext page. Your
>
entry is displayed in the upper left-hand corner of the screen. After you enter the tele-
text page number, your device searches for the desired page. Because not all teletext
pages can be transmitted simultaneously, it may take a few seconds for your unit to
find the page and display it on the television screen.
Teletext page 100 is generally used to display a table of contents.
7.11 Subtitles
When subtitles are transmitted, this is indicated by the on-screen display Subtitle
choosing. If the Subtitle function is switched on (see section 6.4), subtitles will be
automatically displayed, provided subtitles are available for the language you selected.
If subtitles are transmitted via teletext or only in other languages, you can manually switch
them on as follows:
Press the OPT button (several times, if necessary) until a selection screen showing
>
the available subtitle languages and/or teletext pages on which subtitles are trans-
mitted appears below the Subtitle option.
Use the up/down arrow buttons to highlight the desired language/teletext page.
>
Confirm by pressing OK.
>
Subtitles will now be displayed.
Keep in mind that this function only works when subtitles are actually transmitted and that
this setting is not retained when you switch to a different programme.
7.12 Electronic programme guide (EPG)
Your digital receiver is equipped with an electronic programme guide. This is used to display
programme information for individual programmes on the screen.
This gives you an overview of the shows that are currently being broadcast and those that
are to be broadcast today and during the coming days.
27