Change Receiver Pin; Menu Lock - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

Pressing the red function button will open a selection screen. You can select the
>
desired programme list here.
Use the up/down arrow buttons to select the desired programme list (e.g.
>
Favourites A).
Confirm by pressing OK.
>
The selected programme list is displayed.
Now use the arrow buttons to highlight the programme that you want to block.
>
Press the yellow function button to block the programme.
>
A child lock symbol appears next to the selected programme.
After you have configured the programme list to suit your needs, press the MENU
>
button to return to normal operation.
> To unblock programmes, use the same procedure as described above. Highlight the
relevant programme and remove the child lock symbol by pressing the yellow function
button.

8.2.2 Change receiver PIN

The receiver PIN code is set to 0000 at the factory.
Press the OK button. A menu appears where you can change the receiver PIN code.
>
Now use the number buttons to enter the current device PIN code.
>
(factory setting = 0000)
Use the number buttons to enter the new device PIN code of your choosing.
>
> Repeat this entry.
> After you have changed the device PIN code, you are automatically returned to the
Parental settings menu.
Caution:
Do not forget the device PIN code! If this does ever happen, please contact your spe-
cialist dealer.

8.2.3 Menu lock

When the menu lock function is activated, you must enter the PIN code to access the
menus, in addition to having to enter it to unlock blocked programmes.
Activate/deactivate the menu lock using the left/right arrow buttons to turn it
>
on or off.
37