TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento página 49

For daily use
Switching on/off
Switch on the digital receiver by pressing the On/Standby button on the device or
>
remote control.
> Press this button again to switch the device off.
Programme selection
Using the programme up/down buttons
Use the PROG +/- buttons on the device or remote control to move up/down one
>
programme position at a time.
Using the number buttons
Use the number buttons to enter the desired programme number. For example:
>
1
1, then 4
2, then 3,
When entering programme numbers with more than one digit, you have approx. 3 seconds
after pressing each button to complete entering the number.
Using the programme list
Press the OK button.
>
You can now use the up/down arrow buttons to highlight the desired
>
programme.
Pressing the OK button will select the highlighted programme.
>
Use the up/down arrow buttons to move the highlighting up/down one row at
a time. Use the left/right arrow buttons to move through the list one page at
time.
Volume control
To adjust the volume of your digital receiver, press the Volume + button to increase
>
the volume and the Volume - button to lower it.
Press the Mute button to switch the sound on or off.
>
Switching between radio and TV
Press the TV/Radio button to switch between TV and radio modes.
>
For programme position 1
For programme position 14
and then 4
For programme position 234
49