Timer; Exiting The Epg; Timer Recordings; Manually Programming The Timer - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

7.12.3 Timer

The electronic programme guide (EPG) function makes it easy to program the timer.
> Highlight the show (as described above) that you would like to make a timer recording
of.
Now press the red Set timer function button.
>
For control purposes, the "Set timer" menu is displayed with the data for the selected
show. If you need to, you can make changes here (see section 7.13.2.1).
Press the yellow Accept function button to set the timer using the displayed data.
>
Note:
You can cancel the current timer operation by pressing the EXIT button.
>

7.12.4 Exiting the EPG

Press the MENU or TV/Radio button to return to normal operation.
>

7.13 Timer recordings

Your receiver is equipped with a video recorder timer function. You can program the timer
manually (as described in this section) or as explained in section 7.12.3.
You can use the timer on your video recorder to switch the digital receiver on/off so that you
can record the selected show using an external recording device (e.g. video recorder) when
you are away. Keep in mind that you have to program your video recorder in order to record
the show.
Once your video recorder timer has switched the device on, most of the functions on the
remote control are deactivated to keep you from accidentally cancelling your recording.

7.13.1 Manually programming the timer

Use the MENU button to open the Main menu.
>
Highlight the Timer organizing row using the up/down arrow buttons.
>
30