Resetting The Built-In Ic - BREIL CHRONO ALARM YM52 Manual De Instrucciones

RESETTING THE BUILT-IN IC

I
• In case any of the watch hands should move improperly, follow the procedure below to
adjust the hand movement.
B
30
20
16
A
10
(0) (1) (2)
Crown 1
1. Pull out crown "1" to the second click.
2. Press and
3. Push back crown "1" in to the normal
position. The built-in IC will be reset,
and normal movement of the hands will
return. Before using the watch again, be
sure to set the main time and alarm
hands to the desired time and adjust
the position of the stopwatch hands
following the procedure in "Adjusting
the hand position".
simultaneously.