LiftMaster SL 600 Manual De Instalación, Operación Y Manutención página 10

INSTALLATION
8. Position the mounting plate relative to the gate
(Figure 5).
9. Run all cables through the knockout (Figure 6).
10. Mark the mounting hole locations, drill with
a masonry bit. Screw the mounting plate into
place with provided anchoring hardware
(Figure 6).
Figure 5
Rack
TOP VIEW OF GATE
Gate
Rack
Figure 6
Cables
10
11 cm
Mounting Plate
The distance between
the rack and the gate
should be 2.4 cm.
3 cm
Mounting Plate