Extel TELIA Instrucciones De Uso página 102

• Display (Fig. 3)
1. The mobile handset is near the base station.
2. Ongoing communication
3. Loudspeaker on
4. Automatic answering mode on
5. The keypad lock is on.
6. Display the state of battery charge
7. Display indicating that a message is waiting.
• Belt clip (Fig. 4a)
Place the clip at the back of the handset and press it until it locks into the two side notches.
• Inserting rechargeable batteries (Fig. 4b)
Open the lid of the box and insert the rechargeable batteries
CAUTION : Respect the polarity indicated on the battery
Use only original batteries: "Using different batteries may void the warranty"
b. Intercom panel (fig. 2b)
1. Loudspeaker: to be heard outside.
2. Call button: when this button is pressed, the alarm sounds inside and outside.
3. Nametag. To change the nametag label, gently lift the plastic cover (7) using a small screwdriver and slide the
nametag label.
4. Microphone: allows the user to communicate inward.
5. Fixing screw
6. At the back of the intercom panel, terminals for connecting wires.
c. Base and charging stations
• Overview of the base station (fig. 5a)
Upper side of the base station (Fig. 5b)
1. Green LED indicating automatic answering system (blinks when there are messages)
2. Red LED indicating telephone connection
3. "Paging" call key
4. Delete
5. Turn the answer function on/off
6. Volume
7. Stop
8. Next message
9. Previous Message
10. Listen to messages/Pause
Underside view of the base station (Fig. 5c - 5d - 5e)
11. Socket for power supply (Fig. 5c-5d)
12. Socket for telephone cable (Fig. 5c-5e)
GB3