Options; Technical Assistance - Warranty - Extel TELIA Instrucciones De Uso

Transfer capability:
POWER SUPPLY
Handset battery:
Recording capacity :
Duration of use:
Size (LxWxH):
Weight:
Other :

8. OPTIONS

• Additional CB TELIA Handset (4 handsets super maxi.)
• All Extel electric doors
• All Extel electric locks
• All Extel engines

9. TECHNICAL ASSISTANCE - WARRANTY

Failure
• The phone number is not
displayed
• The phone does not work • Connection
• The handset does not
turn on
10 mW average capacity per channel, up to 400 m outdoors in free field
Base Station: 230 V~ / 7,2V
Charging station: 230 V~ / 7,2V
2 x AAA 1,2 V 700mA NiMH
Base Station: 0.9/1.4 watts (standby/talk)
Charging station: 0.0-0.6 watts (depending on the charging
intensity)
Standby: Up to 100 hours
Duration: up to 10 hours (depending on the charging
intensity)
Base Station: 130x115x60 mm
Handset: 45x145x25 mm
Base station: about 205 g
Mobile handset: 130 g (including batteries)
30 min total memory
200 numbers stored
Caller list display of the last 50 calls received.
Cause
• Not authorized by network
operator
• Phone failed
• Power cut
• Batteries
• Connection
/ 500 mA
/ 500 mA
Solution
• The caller ID display must be authorized by
your network operator.
• Make sure the network adapter is properly
connected to the base station and the outlet.
• Make sure the telephone cable is properly
connected to the base station and the tel-
ephone base.
• Connect another phone to your plug: If the
device works, your phone is probably faulty.
• Tip: The phone does not work in case of
power failure.
• Make sure the batteries are correctly installed
and loaded. Use only the rechargeable batteries
supplied
Try removing the batteries for 90 seconds, then
put them back in place
• Check that the network adapter of the charg-
ing station is plugged in
GB20