User's Manual; Gatekeeper Function - Extel TELIA Instrucciones De Uso

Replace the top cover of the control unit with the 6 Phillips head screws (H), making sure not to deform the seal.
Do not block the 2 ventilation holes (T) at the bottom of the control unit (fig.6a)

5. USER'S MANUAL

a. Gatekeeper function
The system is set to the original intercom mode. Your handset can be configured in four modes. The LCD screen
of your TELIA indicates the selected state (fi g. 3-8)
1 • Intercom mode : "Door Int" is displayed on the screen
2 • Call forwarding mode : "Door Ext" is displayed on the screen
3 • Automatic answering mode: "Door Mem" is displayed on the screen
4 • Announce only mode: "Door Ann" is displayed on the screen Ann.» is displayed on the screen
1 • "GATEKEEPER" (Intercom) Mode
- In "Menu", select the icon
- Select "Set mode", confirm with "OK"
- Select "IntercomCall" and confirm with "OK". A beep confirms the change.
- Return to the main screen
- "Door Int" is displayed on the screen.
When a visitor presses the button on the intercom panel, the handset will ring for 20 seconds (different phone ring
tone). You can talk to your visitor by pressing the button
once again to end the conversation.
IMPORTANT : If the handset does not respond after 20 seconds, connect the line by pressing "INT" then "1"
on the plate.
Activate the door open function:
In "GATEKEEPER" Intercom mode, activate the electric lock while you talk to your visitor by pressing and
holding down the " *" key for 2 seconds to open the front door (required activation time is about 1 second).
"Door Open" is displayed on the screen. End the connection by
GB7
, confirm with "OK"
. At the end of your conversation, press the button