Extel TELIA Instrucciones De Uso página 112

3. Scroll through the contacts with the two
automatically selected.
• Delete data in the received calls list
1. To delete a number from the list of incoming calls, proceed as in "Browse calls" until you find the desired
number.
2. Press the [Option] screen key and scroll down to "Delete" menu
3. Press [OK] and
Tip: In step 2, you can also select "Delete All" to delete the entire list.
If the calls list is empty "Empty" appears when you visit.
• Record data in the list of incoming calls from contacts
1. To save a number from the list of incoming calls in contacts, proceed as in "Browse calls" until you find the
number.
2. Press [Option] and scroll down to "Store" menu.
3. Then press [OK] to confirm..
• Internal calls (Intercom)
When several handsets are registered in the base station, internal communications are possible.
- Press the intercom button [INT], the screen displays
You can press the buttons 2, 3, 4 or 5 to call another handset via intercom. (Warning INT1 is reserved for the
intercom panel)
• Forward calls
You can send an external call to another handset (recorded at the base station). During an external call, press the
intercom button [INT] followed by the number of the handset to which you want to transfer the call. When
communication has been taken by the other handset, press the
- If the owner of the other handset does not want to take the call, they must press [END] button. You are now
connected to the external call again.
Tip: The outside caller cannot hear an intercom conversation.
• Make a conference call
If you are connected to an external caller and want to start a conference with another mobile handset :
- Press the Intercom key followed by the number of the mobile handset. When the other handset is picked up,
press [Conf.] button and both handsets can communicate with the outside caller. Press [OK] to end the call.
• Search / page the handset
With the "Paging" function, you can control the function and connection of all mobile handsets registered. Each
handset responds with a trilling sound to confirm the connection to the base station.
1. Press the Page button
2. The mobile handsets are then called.
3. Press any key on the handset to stop the paging sound.
d. Mobile handset settings (Menu fig.3-10)
• Setting the handset ring tone
1. Press [Menu] and scroll down to the symbol
2. Use the keys to select a melody.
3. Use the keys to adjust the ringer volume in the "Volume" function.
GB13
appears. Press [OK] again to confirm the deletion of the number.
on the front face of the base station.
keys. By pressing the
to transfer the communication.
. Then press [OK] to open the ring tones menu.
key, The corresponding number is