TESY ES/GCVM 50 EC Instrucciones De Uso página 35

Model Power (W)
50 1600
80 2400
100 2400
120 2400
To facilitate the setting of the temperature mode and to avoid
calculating the temperature that you need, you can use another scale
by pressing the symbol
In the scale below choose quickly and easy the number of people that
will use the shower and then confirm.
Note: The calculations for the needed quantity of water for each
person are based on the common European norms. They are
average and do not necessarily correspond to your individual habits. If
the hot water is not enough for you, you can raise the set quantity by
selecting a bigger number of people. The maximum number you can
choose varies depending on the volume of the appliance: for 50 l
volume – up to 2 people, 80 l – up to 3 people, 100 l – up to 4 people and
150 l – up to 6 people.
•
Eco smart mode
In Eco smart mode the electric heater elaborates its own algorithm for
operation so as to ensure energy saving, and therefore, to reduce your
electricity bill and at the same time to keep the comfort in your home
while it is being used.
Principle of operation: after selecting Eco Smart mode, the appliance
will learn your habits and it will elaborate a weekly programme so
as to provide the necessary quantity of water in the respective time
when you need it and at the same time to save energy and thus to
reduce your electricity bill. This principle of operation requires a
period of self-training which lasts a week, and after that the Eco Smart
mode begins to accumulate energy savings without disturbing your
comfort calculated on the basis of your studied habits. The appliance
continuously monitors your habits and continuously gets self-trained.
Your TESY electric water heater is of the highest energy class. The class
of the appliance is guaranteed only when it operates in Eco Smart
mode due to the significant energy savings that are generated.
Regardless of the fact that this mode does not require your manual
intervention after you enable it, and it gets self-trained and adjusts,
you can see the temperature of the water in the electric water heater
at any time.
EC1 mode of operation is intended for users with frequently changing
habits for whom an exact schedule of weekly operation would be
difficult to establish. If the operation of the appliance in EC1 mode
does not satisfy you, please select the next level of comfort – EC2
mode. In EC1 and EC2 modes the energy saving is lower, but you will
be provided with bigger quantity of hot water even in cases that you
have changed the time when you usually take a shower.
When you restart the appliance it will begin its self-training again
without considering the previous periods.
Note: The Eco Smart algorithm is protected for a period of 1 hour.
You can restart the algorithm only by the On/Off button, and the
English
Approximate time for heating up to maximum temperature
1 hour and 37 minutes
1 hour and 47 minutes
2 hours and 10 minutes
3 hours and 6 minutes
.
Instructions for using the built-in wireless communication module (Wi-Fi)
EN
35