TESY ES/GCVM 50 EC Instrucciones De Uso página 34

When the appliance has reached the set temperature the message "READY" will appear on the screen and the current
EN
temperature will be shown in dark purple colour.
•
Weekly programmer mode
The appliance that you have purchased is with three embedded weekly programme modes. They can be selected by
P1
the icon . Each of these embedded programmes is a weekly schedule for operation of the electric water heater
where the desired temperature of the water is set for each hour of the day and the night and for all days of the week.
The programmes can be easily and quickly modified in accordance with your preferences and habits.
To see the time schedule of each programme and to change it, if needed, press the icon
three programme modes.
Setting the weekly programmes:
All the three embedded weekly programmes can be re-set according to your preferences. To see the schedule for
operation and to change it, if needed, click on the window:
In the window below you can see the programme mode which you want to check or modify. Using the sliders you
can set the temperature of the water for each day of the week and for each hour of the day and the night.
If you select the symbol
After you make your selection, please confirm by the symbol
Note: Please consider that reaching the set temperature may take more than 1 hour. The time for heating up
depends on the power of the appliance, its volume and the initial temperature of the water. To understand it
better, please look at the table below, which shows the time for heating the water from 15°C to 60°C [Δt45K] by volume
and power of the appliance:
34
Instructions for using the built-in wireless communication module (Wi-Fi)
P1 P2 P3
, and
*
, the appliance will remain in anti-frost mode
P1
and select one of the
.