TESY ES/GCVM 50 EC Instrucciones De Uso página 33

Control of the electric water heater via the Internet.
10.
There is an available application
. operating system. The applications can be found in the stores Google Play
(the device which the application will be installed on should be with the latest updated
version of the respective operating system or at maximum up to one previous version).
You need to connect the device by which you will control the electric appliance to the local network or another
Internet source.
After downloading the "TesyCloud" application or upon opening
enter the email that you used for the registration of the account and also your password. If you have implemented
correctly steps from 1 to 8, you will see a specially developed screen for control of the electric appliance.
Note: If upon activation of the mobile application the main menu of the electric water heater is loaded, and not
the dedicated screen for control via the Internet (shown below), you need to stop the direct Wi-Fi connection with
the appliance established through its aerial wireless network TCHxxxxxxxx.
•
Working with the screen to control the device via the Internet
To make any settings the water heater should be switched on:
•
Modes of operation
•
Manual operation mode
When this mode of operation is selected you can set the desired temperature of the water by moving the slider to
the left or to the right.
During heating the message "HEATING" will appear on the screen and the current temperature will be shown in red
colour
English
tesyCloud for a smartphone or a tablet for both Android
www.mytesy.com
>
>
Instructions for using the built-in wireless communication module (Wi-Fi)
and iOS
and App Store
in a browser, you need to
EN
33