TESY ES/GCVM 50 EC Instrucciones De Uso página 28

EN
Attention! Your TESY electric water heater is of the
highest energy class. The class of the appliance is
guaranteed only when it operates in ECO mode
"Eco Smart" due to the significant energy savings
that are generated.
Principle of operation: after selecting one of the
three Eco Smart modes, the appliance will learn your
habits and it will elaborate a weekly programme so
as to provide the necessary quantity of water in the
respective time when you need it and at the same time
to save energy and thus to reduce your electricity bill.
This principle of operation requires a period of self-
training which lasts a week, and after that the Eco Smart
mode begins to accumulate energy savings without
disturbing your comfort calculated on the basis of your
studied habits. The appliance continuously monitors
your habits and continuously gets self-trained.
In this mode it is impossible for you to intervene
after it has been selected, i.e. you can NOT adjust the
temperature of the water using the arrow buttons >
and <.
In case you often change your habits, the appliance
will not be able to elaborate an exact algorithm which
to guarantee your comfort and to provide you with
hot water exactly when you need it. In this sense, if the
operation of the appliance in Eco Smart mode does not
satisfy you and does not provide you with the required
comfort, and at the same time you want the appliance
to keep reducing your costs, by pressing the EcoSmart
button you can select EC1 mode of operation – for
higher level of comfort which again guarantees energy
saving, but to a lower extent. EC1 mode of operation is
intended for users with frequently changing habits for
whom an exact schedule of weekly operation would be
difficult to establish. If the operation of the appliance in
EC1 mode does not satisfy you, please select the next
level of comfort – EC2 mode. In EC1 and EC2 modes the
energy saving is lower, but you will be provided with
bigger quantity of hot water even in cases that you have
changed the time when you usually take a shower.
You can leave the Eco Smart mode by selecting any
of the other modes of the appliance using the PROG
button.
•
"LOCK" function
By pressing the
panel gets "locked" and it will not accept any
commands. To unlock it again, press and hold the
button for 3 seconds.
•
"Vacation" function VAC
If you plan to be away from home for more than a day,
you can enable the Vacation mode, so that the electric
water heater will "know" when you will be back to
provide you with hot water.
28
Instructions for using the built-in wireless communication module (Wi-Fi)
button for 3 seconds the control
Press the VAC button. Enter the days of your absence
from home using the two arrows > and < (you can
enter up to 99 days). Confirm by pressing the OK
button. Choose the time when you want the appliance
to be switched on by using the two arrows > and <,
and confirm by pressing the OK button. Then set the
temperature of the water and confirm again by pressing
the OK button. Vacation mode is on and the appliance,
having provided hot water, will expect your return.
The number of days that you enter (the period of
your absence) must include the day on which you
will be coming back home.
•
"BOOST" function (a one-time heating up to
maximum temperature and automatic return to the
already selected mode of operation)
When the BOOST function is enabled the water heater
will heat the water up to 75°C without changing the
algorithm of operation of the respective mode of
operation, i.e. without changing the weekly programme,
the Eco Smart logics of operation or the manually set
temperature. When the maximum temperature has
been reached the appliance automatically switches to
the previously selected mode of operation. The BOOST
function is active with the following modes: Eco Smart,
Vacation and Weekly Programmer.
To enable the BOOST function, press continuously (for
about 3 seconds) the arrow >.
The display will show bSt and, at intervals of few
seconds – the value of the current temperature of the
water.
•
"RESTORE FACTORY SETTINGS" function
To enable this function, the appliance must be in Stand-
by mode. You can enable it by pressing and holding
the > and < buttons for at least 10 seconds. During
these 10 seconds you should hear two sound signals.
The first one is a test, all symbols on the display will be
illuminated, and when you keep pressing the buttons
you will hear the second signal which will indicate that
you have restored the factory settings of the appliance.
Note: If the factory settings are enabled, then you
have to reconnect to the Wi-Fi device.