Electrical Connection - Angelo Po 0G0FR3ED Manual De Uso

A variety of optional installation kits
are available for arranging appli-
ances in banks:
D)Over cupboard installation kit
E)Bridge installation kit

ELECTRICAL CONNECTION

Important
The connection must be made by au-
thorised, skilled personnel, in accord-
ance with the relevant legal requirements,
using appropriate and specified materials.
The appliance is supplied with operating
voltage 400V/3N, which can be switched to
230V/3 (see next point).
IT
Connect the appliance to the mains electricity sup-
GB
ply as follows.
1 - If not already present, install a circuit-breaker
DE
(A) with overload cutout and differential safety
breaker close to the appliance.
2 - Remove the control panel (B).
FR
3 - Connect the circuit-breaker (A) to the terminal
board (C) of the appliance as shown in the dia-
ES
gram and in the electrical system diagram at the
back of the manual.
N.B.: use a cable with at least H05RN-F characteristics.
Important
When connecting, take care to connect the
neutral and earth lines.
4 - Replace the control panel (B) on completion of
the operation.
English
D
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
B
- 14 -
E
A
C
IDM-39604002300.tif