Chrono; Enabling/Disabling The Chrono - Dal Zotto Leyla Elite Manual Del Usuario

CHRONO

This function allows you to program the stove to switch on and o automatically.
The factory setting for CHRONO is o .
The chrono allows you to program 4 time slots within a day to be used for every day of the week.
In each time slot, it is possible to set the ignition and switch-o times, the days of use of the programmed time slot, the desired
temperature and the set power. The current date and time setting is essential for the correct operation of the timer.
Recommendations
Before using the chrono function, you must set the current day and time, so check that you have followed the points listed in the sub-
chapter "DATE TIME". To make sure that the chrono function works properly, as well as programming it, it is also necessary to activate it.
The 4 time slots can be overlapped by setting the ignition and switch-o times. In this way, a combination of times is obtained in which
it is possible to set di erent temperatures and powers without a ecting the operating status of the stove.
N.B.: if there are overlapped time slots, the product will remain on until the furthest switch-o time.

ENABLING/DISABLING THE CHRONO

CONTROLS PROCEDURE
Š Press 6.
Š Press 3 until CHRONO appears and con rm by pressing key 6.
Š Con rm ENABLING by pressing 6.
Š Use keys 4 -5 to enable (ON) or disable (OFF)
Š Press 6 to con rm or 1 to return to the previous menus to the initial state.
CHRONO >
IF THE WEEKLY CHRONO IS ACTIVE ON THE CONTROL PANEL, A SMALL ICON IS DISPLAYED
ENABLING >
PRG1 > START PRG1
STOP PRG1
MONDAY...SUNDAY
SET PRG1
POWER PRG1
PRG2 > START PRG2
STOP PRG2
MONDAY...SUNDAY
SET PRG2
POWER PRG2
PRG3 > START PRG3
STOP PRG3
MONDAY...SUNDAY
SET PRG3
POWER PRG3
PRG4 > START PRG4
STOP PRG4
MONDAY...SUNDAY
SET PRG4
POWER PRG4
PRG1
PRG2
PRG3
PRG4
OFF-00:00
OFF-00:00
LOW-TA - 07- 37 °C - HOT
OFF-00:00
OFF-00:00
LOW-TA - 07- 37 °C - HOT
OFF-00:00
OFF-00:00
LOW-TA - 07- 37 °C - HOT
OFF-00:00
OFF-00:00
LOW-TA - 07- 37 °C - HOT
ENGLISH
On/o Enable/disable PRG 1
On/o Enable/disable PRG 2
On/o Enable/disable PRG 3
On/o Enable/disable PRG 4
Ignition time PRG1
Switch-o time PRG1
On/o Enable/disable the days of PRG1
Set thermostat PRG1
1-5 Set power PRG1
Ignition time PRG2
Switch-o time PRG2
On/o Enable/disable the days of PRG2
Set thermostat PRG2
1-5 Set power PRG2
Ignition time PRG3
Switch-o time PRG3
On/o Enable/disable the days of PRG3
Set thermostat PRG3
1-5 Set power PRG3
Ignition time PRG4
Switch-o time PRG4
On/o Enable/disable the days of PRG4
Set thermostat PRG4
1-5 Set power PRG4
55