Babytalker 3500 SEDS
7.2
Parent Unit Components
See Figure
on the fold-out page.
B
17 Volume LEDs
18 Loudspeaker
19 LED Torch
20 Microphone
21 Link LED
22 Display
23 Paging button
24 Talk button
PTT
PTT
25 LED torch button
7.3
Display Description
See Figure
on the fold-out page.
C
Temperature (a)
Feed time alert (b)
Lullaby (c)
Information line (d)
Battery indicator (e)
Check (f)
Sensitivity (g)
8
Initial use
8.1
Package Contents
The equipment is supplied as standard with the following items:
- 1 baby unit
- 1 parent unit
- 1 charging station
- 2 AC mains adapters
8.2
Installing Batteries in the Baby Unit
•
You can operate the baby unit with three AA cells (LR06/Mignon; we recommend alkaline
cells) or the included AC mains adapter.
•
The baby unit cannot recharge batteries.
•
It is recommended to always leave the batteries in the unit, even if you use the AC mains
adapter. The unit will automatically switch to battery power in case of a mains power
interruption.
– Rotate the belt clip
– Turn the screw on the cover of the battery compartment
unit 90° counterclockwise and remove the battery compartment cover.
•
Do not turn the screw past the 'Open' point.
26 Increase volume / Next menu item
27 Confirm button
28 Decrease volume / Previous menu item
29 On/Off switch
30 Belt/wall fastening clip
31 Battery compartment cover
32 AC mains adapter
33 Charging indicator
Shows the temperature measured by the baby unit. Blinks when the
temperature is outside the set range.
Visible when the feed time alert is on.
Visible when a lullaby is playing.
Provides more information on various settings, such as the date and time on the
parent unit or the selected lullaby on the baby unit.
Shows the status of the rechargeable battery.
- battery fully charged
- battery nearly empty
Visible when the baby unit night light is on.
Visible on the parent unit while the sensitivity is being set.
- 1 user guide
- 1 service card
- 1 NiMH rechargeable battery pack
upward.
15
at the back of the baby
13
OPEN
5