Baby Unit Components; Parent Unit Components; Initial Use; Package Contents - Topcom BABYTALKER 3100 Manual De Usuario

Babytalker 3100
7.1

Baby Unit Components

See Figure A on the fold-out page.
1 Night light
2 Power LED
3 Night light button
4 On/Off switch
5 Paging button
6 Microphone
7.2

Parent Unit Components

See Figure on the fold-out page.
B
11 Volume LEDs
12 Loudspeaker
13 Link LED
14 Increase volume
15 On/Off switch
16 Decrease volume / Previous menu
item
8

Initial use

8.1

Package Contents

The equipment is supplied as standard with the following items:
- 1 baby unit
- 1 parent unit
- 1 charging station
- 2 AC mains adapters
8.2

Installing Batteries in the Baby Unit

See Figure on the fold-out page.
A
• You can operate the baby unit with three AA cells (LR06/Mignon; we recommend alkaline
cells) or the included AC mains adapter.
• The baby unit cannot recharge batteries.
• It is recommended to always leave the batteries in the unit, even if you use the AC mains
adapter. The unit will automatically switch to battery power in case of a mains power
interruption.
– Rotate the belt clip
– Turn the screw on the cover of the battery compartment
unit 90° counterclockwise and remove the battery compartment cover.
• Do not turn the screw past the 'Open' point.
– Fit three AA alkaline cells (LR06/Mignon) in the battery compartment.
Ensure that the polarity is correct.
– Close the battery compartment.
• Never mix used cells with fresh cells.
7
8
9
10 NEMO radiation switch
17 Power LED
18 Belt/wall fastening clip
19 Battery compartment cover
20 Charging indicator
21 AC mains adapter
- 1 user guide
- 1 service card
- 1 NiMH rechargeable battery pack
9 upward.
Battery cover closing screw
Connector for AC mains adapter
Fixing clips
7 at the back of the baby
OPEN
SEDS
1 x A A
LONG
6V/300mA
+ -
ECO 1 x A A
5