Names Of Major Parts And Components Of Tiller; Chapter Iv Operation Method Of The Tiller; Routine Check - Stiga RC 685 Manual De Instrucciones

(2) Names of major parts and components of tiller

1. Accelerator valve
regulator
2 Extinguishing switch /
Clutch handle
3.Handle pipe connecting
part
Before each tiller leaves the factory, it has gone through shakedown test, but the user still should
check all mechanisms of the machine and adjust them before actually using it, so as to let it work
better.

(1) Routine check

1. Check engine oil
Warning! The engine shall be filled with 0.6L of engine oil. If the level of engine oil is lower
than the normal one when the user is using the engine, the engine will be severely damaged!
Warning! Please use clean and high-quality engine oil for four-stroke engines. Use of dirty oil
or any other type of engine oil will shorten the engine's service life.
- Put the engine in a horizontal position.
- Screw out the oil dipstick of the engine and clean it by wiping it (See Fig.3)
4. Gasoline engine
5. Front wheel assembly
6. Tilling blade
7. Damping lever
8. Reduction box

Chapter IV Operation method of the tiller

Figure 1
4
9.Damping partmounting
seat
10. Lifting part
11. Gear shift lever
assembly
12. Handle pipe assembly