Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Definitions
1
Power Supply Cord
Supplies electric current to motor.
2
Cord Lock Lever
Helps prevent extension cord from
becoming detached when clamped
around the strain relief hook.
3
Strain Relief Hook
Clamps the extension cord and
reduces the likelihood of
disconnection of the extension cord
receptacle from the hedge trimmer
plug.
4
Trigger Switch
Designed to work together with the
front-handle switch as part of the
dual switch system to engage or
stop the cutting blades. Located on
the rear handle.
5
Rear Handle
The support handle, located at or
toward the rear of the hedge
trimmer.
6
Front Handle Switch
Designed so that the cutting blades
can only be activated if both it and
the trigger switch are
simultaneously in the depressed
position. Located next to the front
handle.
7
Front Handle
Handlebar at the front of hedge
trimmer.
8
Hand Guard
Limits useable grip area for front
hand away from cutting blades.
Helps protect hand from cuttings.
16
9
Cutting Blades with Integral Cutting
Blade Guard
Steel blades for cutting hedges and
shrubs. The teeth of the blade guard
extend further out to the side than
the cutting teeth. This design helps
to reduce the risk of operator
contact with the cutting portion of
the blades.
10 Blade Scabbard
Covers cutting blades when hedge
trimmer is not in use.
11 Guide Guard
Protects blades in case of ground or
wall contact.
Specifications
Motor
HSE 60
Voltage:
120 V
Ampere Rating:
4.5 A
Frequency:
60 Hz
Rating:
500 W
Fuse:
10 A
Insulation:
Double
Insulation E
HSE 70
Voltage:
120 V
Ampere Rating:
4.5 A
Frequency:
60 Hz
Rating:
500 W
Fuse:
10 A
Insulation:
Double
Insulation E
Cutting Blades
HSE 60
Sharpening angle:
39°
Tooth spacing:
1.1 in. (27 mm)
Stroke rate:
3,200 rpm
Cutting length:
17.7 in (450 mm)
HSE 60, HSE 70
Publicidad
Capítulos
Tabla de contenido
