Maintenance And Repairs; Disposal - Stihl HSE 60 Manual De Instrucciones

HSE 70
Sharpening angle: 39°
Tooth spacing: 1.1 in. (27 mm)
Stroke rate: 3,200 rpm
Cutting length: 23.6 in (600 mm)
Weight (complete unit)
HSE 60 9.0 lbs. (4.1 kg)
HSE 70 9.3 lbs. (4.2 kg)
HSE 60, HSE 70

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and, in some cases, by the STIHL
parts symbol K. The symbol may
appear alone on small parts.

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
English
17