Loading Paper
Loading
10
Preparation
Notes
• Do not fold the paper or touch the printing surface. Dust on the printing surface
will result in poor print quality.
• After loading the paper roll, pull out and cut off the first 15 to 20 cm (6 to 7
inches) to remove any slack.
• Use only UPP-110 series paper (p. 19).
• Set the PAPER TYPE selector according to the paper type (p. 6).
1
Press the power ON/OFF switch to turn on the printer.
2
Press the OPEN/CLOSE button to open the paper lid.
3
Place the paper roll in the printer.
Place the paper with the thermo-sensitive
side (printing side) up.
7
⁄
8