Pausing Playback; Playing Cds On The Built-In Player; Basic Operation Of Cd; Setting Random Play - Pioneer DVH-P7000R Manual De Operación

Playing tra Selecting r
Playing CDs on the
built-in player

Basic operation of CD

Random play lets you play back tracks on the You can choose between repeat play of a disc or
CD in a random order. a track.
1 Press on the head unit to open the
OPEN
front panel.
1 Press 1 Move the joystick left/right to select the to select
F RDM
Disc loading slot appears.
Press repeat range option. until appears in the display.
F Random
• After inserting a CD, press
The repeat range option is indicated in blue. • Pressing
FUNCTION
the built-in player.
performs the same operation.
• Pressing on the head unit also per-
SOURCE
2 Move the joystick up/down to switch to
forms the same operation.
2 Press E to turn random play on.
the desired setting.
This switches you to the selected setting. appears in the display. Tracks will
2 Insert a CD into the Disc loading slot.
Random :ON
play in a random order. (disc)— (track)
When you set
Disc Track
AUTO PLAY: ON
• Pressing 5 on the head unit also performs
• When you select
automatically start. If you set
Disc
the same operation. entire disc is repeated. When you select
press to select
SOURCE
(track), playback of that track only is repeated.
3 Press e to turn random play off.
Disc loading slot
appears in the display. Tracks will
Random :OFF
continue to play in order.
• Pressing ∞ on the head unit also performs the

Setting random play

same operation.
Tracks of the CD you are currently listening to
are played in a random order.
Scanning tracks of a CD
1 Move the joystick left/right to select the
button
Scan play lets you hear the first 10 seconds of random option.
EJECT
• You can eject a CD by pressing
each track on the CD. The random option is indicated in blue.
head unit.
• To avoid a malfunction, make sure that no
1 Press 2 Move the joystick up/down to switch to to select
F T.SCAN
metal object comes into contact with the front the desired setting. Press until
F Track Scan
This switches you to the selected setting. panel is open. • Pressing
FUNCTION
performs the same operation. (on)— (off)
ON OFF
3 After a CD has been inserted, close the
front panel.
2 Press E to turn scan play on.
appears in the display. The first
Track Scan :ON
4 Use to adjust the sound level.
VOLUME
10 seconds of each track is played.
Press to increase or decrease the vol-
VOLUME
• Pressing 5 on the head unit also performs
ume level.
the same operation.
• Rotating on the head unit also
VOLUME
increases or decreases the volume.
5 To skip back or forward to another track,
press 4 or ¢ .
Track numbers are displayed for 8 seconds.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals Downloaded from Caradio-Manual.com Manuals
.
to select
SOURCE
on the head unit also
, playback will
(disc), playback of the
AUTO PLAY: OFF
(refer to page 17). Track
DVD
on the
EJECT
.
appears in the display.
on the head unit also
3 When you find the desired track press e

Setting scan play

• If the remote control is set to
4 and ¢ do not operate. In this case,
to turn scan play off.
The beginning of each track on the CD you are
press 1 or ¡ to skip to another track.
Track Scan :OFF
currently listening to is played for about 10 sec-
track will continue to play.
onds.
• Pressing ∞ on the head unit also performs the
6 To perform fast forward or reverse, press
and hold 1 or ¡.
same operation.
1 Move the joystick left/right to select the
• Pressing and holding 2 or 3 on the head unit
• If the display has automatically returned to
scan option.
also performs the same operation.
the playback display, select
The scan option is indicated in blue.
• If you continue pressing 1 or ¡ for 5
pressing (
F FUNCTION
seconds, the color of the fast reverse/fast
2 Move the joystick up/down to switch to
forward mark (
the desired setting.
Note
white to blue. When this happens, fast
This switches you to the selected setting.
reverse/fast forward continues even if you
• After scanning of a CD is finished, normal
(on)— (off)
,
ON OFF
release 1 or ¡. To resume playback at a
playback of the tracks will begin again.
desired point, press 6.
3 When you find the desired track, move the
• If you fast forward to the end of a CD, fast
joystick up/down to cancel the scan play.
Pausing CD playback forward continues from the beginning of
the disc.
Pause lets you temporarily stop playback of the
• If you fast reverse to the beginning of a CD,
Note
CD.
normal playback resumes.
• Scan play is canceled automatically after all
1 Press tracks have been scanned. to select
F
Press until
Notes
F Pause
• Pressing
FUNCTION
• The built-in player plays one, standard,

Pausing playback

performs the same operation.
12-cm or 8-cm (single) CD at a time. Do not
Pause lets you temporarily stop playback of the use an adapter when playing 8-cm CDs.
2 Press E to turn pause on.
CD. • Do not insert anything other than a
appears in the display. Play of the
Pause :ON
DVD/Video CD/CD into the Disc loading slot.
• This function is operated by using the remote
current track pauses.
• If you cannot insert a disc completely or if control.
• Pressing 5 on the head unit also performs
after you insert a disc the disc does not play,
the same operation.
Press 6 during playback.
check that the label side of the disc is up.
The still mark ( Press to eject the disc, and check the
EJECT
3 Press e to turn pause off.
and playback is paused letting you view a still disc for damage before inserting the disc
appears in the display. Play will
Pause :OFF
image. again.
resume at the same point that you turned pause
• To return to normal playback, press 6 once
• If the built-in player does not operate properly,
on.
an error message such as
more.
• Pressing ∞ on the head unit also performs the
displayed. Refer to Error messageson page 97.
same operation.
DVH
appears in the display. The
again by
T.SCAN
on the head unit).
/ ) changes from
.
PAUSE
appears in the display.
on the head unit also
) is displayed for 4 seconds
ERROR-11
Section Section Section
07 07 07
mode,
may be
En 47