baltur RINOX 190 L2 Manual De Instrucciones página 27

Functioning/malfunctioning and diagnostics indications
The "EK..." release button is the main means of visually following the working conditions,
EK
both for accessing the diagnostic function and releasing the command and control device.
Functioning/malfunctioning and diagnostics indications
Status
Waiting conditions, other intermediate stages
Oil preheat "on", waiting time max 5s. "tw"
Ignition stage
Correct working, current intensity
flame detector above admitted minimum
Incorrect working, current intensity
flame detector below minimum
Drop in voltage
Burner lock out status
Fault signal
Stray light before burner ignition
Fast flashing for diagnostics
Legend
ROSSO
The multicolour LED indicates command and control device status both during its
normal working and in its diagnostic function.
GIALLO
VERDE
Visual indication:
During working, the release button shows the command and control device's status,
while the table below shows the colour sequences and their
No light
RED
9 / 16
0006080951_201401
TABLE
Colour sequence
..................................
...........................steady
YELLOW
meanings.
Colours
No light
Yellow
Intermittent yellow
Green
Intermittent green
Alternating yellow and red
Red
Intermittent red
Alternating green and red
Fast flashing red
GREEN