Installing On Boiler; Electrical Connections - baltur RINOX 190 L2 Manual De Instrucciones

INSTALLING ON BOILER

1) Lock the flange B on the tube of the burner via the supplied screw A and nut C (n° 2 x BTL 20).
2) Position the insulating seal E on the tube, interposing the cord F between flange and seal.
3) Finally, fix the burner to the boiler via the 4 stud bolts and relative nuts (supplied).
N.B. Make sure the tube penetrates into the combustion chamber as per the boiler manufacturer's instructions.

ELECTRICAL CONNECTIONS

The electrical lines should be at an adeguate distance from hot parts.It is advisable to make all the connections with flexible elecric wire.
Conductor's minimun section 1,5 mm .
2
7 / 16
0006080951_201401
N° 0002934100
REV.: 10/02/04