ENGLISH
DVD Camcorder: Advanced Recording
Cutting Off Wind Noise (Wind Cut)
The Wind Cut function works only in Camera Mode. page 26
Use the Wind Cut when recording in windy places such as the beach or
near buildings.
The Wind Cut function minimizes wind noise or other noise while
recording.
- When the Wind Cut is on, some low pitched tones are eliminated
along with the sound of the wind.
1. Set the [Mode] switch to [DISC].
(SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [
3. Press the [MENU] button.
4. Move the [Joystick] up or down to select
<Record>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Wind
Cut>, then press the [Joystick].
6. To activate the Wind Cut function, move the
[Joystick] up or down to select <On>, then press
the [Joystick].
7. To exit, press the [MENU] button.
Wind Cut icon (
) is displayed.
Note
Make sure Wind Cut is set to Off when you want the
microphone to be as sensitive as possible.
4
►Record
(Camera)].
6
►Record
7
Videocámara con DVD: Grabación avanzada
Corte de ruido del viento (Wind Cut)
La función Wind Cut sólo está operativa en el Camera Mode.
página 26
Use la función Wind Cut cuando grabe en lugares donde sople el
viento, como en la playa o cerca de edificios.
La función Wind Cut minimiza el ruido del viento y otros ruidos
durante la grabación.
Camera Mode
1. Coloque el interruptor [Mode] en [DISC].
Rec Mode
►SP
Wind Cut
►Off
2. Coloque el interruptor [Power] en
3. Presione el botón [MENU].
4. Mueva el [Joystick] hacia arriba o hacia abajo
Move
OK
Select
MENU
Exit
Camera Mode
5. Mueva el [Joystick] hacia arriba o hacia abajo
Rec Mode
Wind Cut
Off
6. Para activar la función Wind Cut, mueva el
On
7. Para salir, presione el botón [MENU].
Move
OK
Select
MENU
Exit
Nota
SP
STBY
Asegúrese de que la función Wind Cut esté
30 min
Off cuando quiera que el micrófono sea lo más
sensible posible.
ESPAÑOL
- Cuando la función Wind Cut está activada,
se eliminan algunos sonidos graves junto con
los del viento.
(sólo SC-DC173(U)/DC175/DC575)
[
(Camera)].
para seleccionar <Record> y pulse el botón
[Joystick].
para seleccionar <Wind Cut> y pulse el botón
[Joystick].
[Joystick] arriba o abajo para seleccionar
<On> y pulse el botón [Joystick].
Aparece el icono Wind Cut (
).
51