Adjustments; Adjusting Consistency; Adjusting Temperature (Ts-V); Adjusting Timer And Start-Up - Maquina Semplice Manual De Uso

1
2
3
1
0
5
7
6
3
Adjusting mechanical timer
The timer allows to pour the mix in ahead
of time and have slush ready to serve at
the programmed time (unattended ope-
ration). The timer determines when the
machines is in slush mode or cold drink/
maintenance mode.
Set the timer only with the main
power switch in OFF position.

6.Adjustments

Standard machines
The consistency of the slush may
be adjusted by means of the
screw shown in the figure:
Raise the consistency (+): turn the
valve anticlockwise.
Lower the consistency (-): turn
the valve clockwise.
6.Adjustments
Turn off and unplug
Turn off all the switches and
unplug the machine from
the mains.
Turn the thermostat
The order of the ther-
mostat is the same as
the order of the bowls.
4
To obtain a higher
refrigeration power
(lower product tempe-
rature) turn it clockwise
towards higher power
values.
6.Adjustments

6.1 Adjusting consistency

Press the Refrigeration switch
(pos. "I"), then, adjust the con-
sistency of the slush using the
The regulation can be carried
out at step from 1 a 16.
12

6.2 Adjusting temperature (TS-V)

In simple and double machines re-
move the right panel.
In triple machines remove the rear
panel.
2
Reassemble the panel
Use a screwdriver.
Start the machine.
4

6.3 Adjusting timer and start-up

12
9
6
1
(Timer set to 12:45)
Consistency / Adjusting Tº / Timer
machines
Evo/Super
and keys.
: Greater consistency.
: Lesser consistency.
(Only in cold drink mode)
Remove the panel

Adjusting the timer

Turn the outer wheel on
A
the timer clockwise until
the current time lines up
B
with the arrow (A) on the
clock face.
Check that the selector (B)
is in the central position.
17