Assembly - Maquina Semplice Manual De Uso

3
5
*1
Mount the joint of the bowl
(Push&Pull tap)
Install the seal into the
3 bowl rear part stretching
slightly with both hands.
Clean the bowl
Wash the interior and
the exterior of the bowl
with a cloth or sponge.
Rinse with generous
amounts of water.
Clean the parts
Fill another container with
sanitizer solution mixed
in water (2% of sodium
hypoclorite mixed in water
(bleach)).
Dip the dismantled compo-
nents, leave to soak in the
solution for 30 minutes.
7.Cleaning
Mount the Twist Tap
(Twist/V.mix models)
See annex: assembly -
disassembly Twist tap.
(Spin tap)
Install the seal on the
evaporator and lubri-
cate the entire surface.
Wash the lid with a sponge. Take care
4
X
not to wet the electric contact (X).
Place the components on a clean surface and dry
6
them.
2
Mount the mixer seal
Install the seal on the mixer and lubricate the seal in
4
the areas indicated using the vaseline provided.
Cleaning / Assembly
Clean the lid
Allow to dry

7.5 Assembly

Mount the drip
tray
Reposition the float and
the grid on the top of the
tray. Fit the tray back in
place and press down to
secure it to the machine.
21