Connecting The Printer; Connecting To The Power Source - Brother P-touch PT-97OOPC Guia Del Usuario

Connecting the printer

Connect the printer to the power source and a computer.
Connecting to the power
source
Connect the included power supply cord
1
to the AC adapter.
2 Insert the AC adapter connector into the
AC adapter jack on the back of the
printer.
24V
DC IN
3 Plug the power supply cord into an
electrical outlet (AC 120 V).
DC IN 24V
24V
DC IN
Turning on the printer
4
Turn on the main power switch on the
back of the printer, and then press the
power button on the front of the printer.
Turning off the printer
Hold down the power button on the front
of the printer until the printer is turned off,
and then turn off the main power switch
on the back of the printer.
S T A T U S
Power
button
Note
●
Always turn the power off first using the
power button on the front of the printer
before removing the AC adapter or
turning off the main power switch.
●
After using the printer, remove the power
supply cord from the electrical outlet and
the AC adapter from the printer and store
for future use.
●
When removing the AC adapter, do not
pull the AC adapter cord. The wire in the
AC adapter cord may break.
●
Do not use any AC adapter other than the
one included with the printer. Otherwise
the printer may malfunction.
Main power
STA TUS
switch
15