Only); Serial Interface Settings (Windows ® Only); Setting The Computer Baud Rate; Setting The Printer Baud Rate - Brother P-touch PT-97OOPC Guia Del Usuario

Serial interface settings (Windows
Use the following steps to change or confirm
the port and the baud rate settings on the
computer and the printer. The following
procedure is shown based on Windows Vista
Setting the computer baud
rate
1 On the taskbar, click the "Start" button,
and then click "Control Panel".
Select "Printers and Other Hardware"
2
(XP) / "Hardware and Sound" (Windows
®
Vista /Windows
"Printers and Faxes" (XP) / "Printer"
(Windows Vista
Right-click the "Brother PT-XXXX" icon,
3
and then select "Properties".
Click the "Ports" tab and then select the
4
port you use from the list.
To save the settings, click [Apply].
Click the "Device Settings" tab, and
5
"Utility...", and then click [Properties...]
that appears next to Utilities.
44
®
7) and then click
® ®
/Windows 7).
®

only)

Select the desired baud rate.
6
®
.
7 Click [Apply].
The baud rate will be changed.
Click [Exit].
8
Click [OK].
9
Setup is complete and the setting window
will close.

Setting the printer baud rate

For details on the setting the printer baud rate,
download "P-touch Template manual" (English
only) from the following web site.
http://solutions.brother.com/
[Select your region/country]-[Choose your
product]-[Downloads]