Metal Processing; Emission Levels; Operation; Switch On/Off - Festool CARVEX PSC 400 EB Manual De Instrucciones Original/Lista De Piezas De Repuesto

– Wear suitable protection such as ear protec-
tion, safety goggles, a dust mask for work
which generates dust, and protective gloves
when working with raw materials and when
changing tools.
– Always secure the workpiece in such a man-
ner that it cannot move while being sawed.
– Always connect the machine to a dust extrac-
tor when work involves dust generation.
– Stroboscopic light can cause epileptic
seizures. Do not use this machine if you are
susceptible to epileptic seizures.
– Do not look into the stroboscope light. Look-
ing into the light source can damage your vi-
sion.
5.3

Metal processing

When processing metal, the following
measures must be taken for safety rea-
sons:
– Connect the machine to a suitable dust ex-
tractor.
– Regularly remove dust deposits in the motor
housing.
– Use a metal saw blade.
– Close the chip guard.
Wear protective goggles.
5.4

Emission levels

Levels determined in accordance with EN
60745 are typically:
Sound pressure level
Noise level
Uncertainty
CAUTION
Operating noise
Damage to hearing
X Use ear protection!
Vibration emission value a
three directions) and uncertainty K measured
in accordance with EN 60745:
L = 88 dB(A)
PA
L = 99 dB(A)
WA
K = 3 dB
(vector sum for
h
PSC 400 EB
Sawing wood
Handle a = 6,0 m/s
h
K = 2,0 m/s
Gear a = 11,0 m/s
h
head
K = 2,0 m/s
Sawing metal
Handle a = 7,0 m/s
h
K = 2,0 m/s
Gear a = 12,0 m/s
h
head
K = 2,0 m/s
The emission values specified (vibration, noise)
were measured in accordance with the test
conditions stipulated in EN 60745 and are in-
tended for machine comparisons. They are also
used for making preliminary estimates regard-
ing vibration and noise loads during operation.
The emission values specified refer to the main
applications for which the power tool is used. If
the electric power tool is used for other applica-
tions, with other tools or is not maintained suf-
ficiently prior to operation, however, the vibra-
tion and noise load may be higher when the tool
is used. Take into account any machine idling
times and downtimes to estimate these values
more accurately for a specified time period.
This may significantly reduce the load during
the machine operating period.
6

Operation

6.1 Changing the battery pack
L The cordless jigsaws can be used with all
Festool battery packs of the BPS series.
Risk of injury! Always remove the
belt clip from battery packs from the
BPC series prior to use.
6.2

Switch on/off

The electric power tool has one button
each side for switching on/off.
The PSBC 400 EB also has a variable speed trig-
ger [1-3] with switch lock [1-4]. For continuous
operation, use the button [1-2].
6.3 Charging the battery pack
L The battery pack is delivered partially
charged. To guarantee the full battery pow-
er, charge it completely before using it for
the first time.
CARVEX
GB
PSBC 400 EB
2 2
a = 10.0 m/s
h
2 2
K = 2,0 m/s
2
2
2 2
a = 11.0 m/s
h
2 2
K = 2,0 m/s
2
2
[2]
[1-2] on
[3]
17