Metal Processing; Technical Data; Health Hazard By Dust; Intended Use - Festool CARVEX PSC 420 EB Manual De Instrucciones

English
– The saw blade on the jigsaw must always
be running when it makes contact with the
workpiece.
–
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.
– Harmful/poisonous dust may be produced
when working (e.g. paint products con­
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try.
– Always connect the machine to a dust ex­
tractor when performing work that gener­
ates dust.
– Stroboscopic light can cause epileptic
seizures. Do not use this machine if you
are susceptible to epileptic seizures.
– Do not look into the stroboscope light.
Looking into the light source can damage
your vision.
– Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
3.3

Metal processing

When processing metal, the following
measures must be taken for safety reasons:
– Connect the machine to a suitable dust ex­
tractor.
– Regularly remove dust deposits in the mo­
tor housing.
– Use a saw blade specifically designed for
the cutting of metal.
– Close the chip guard.
5

Technical data

Cordless jigsaw
Motor voltage
Stroke rate
Stroke length
10
Wear protective goggles.
3.4

Health hazard by dust

WARNING! various dust created by pow­
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can­
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically
treated lumber.
The risk from these exposures varies, depend­
ing on how often you do this type of work. To re­
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially designed to filter out microscopic par­
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

Jigsaws are designed for sawing wood and ma­
terials similar to wood. With the special saw
blades offered by Festool, these machines can
also be used for sawing plastic, steel, alumini­
um, non-ferrous metal and ceramic plates.
The user is liable for improper or non-in­
tended use.
This power tool is suitable for use with
BP Festool battery packs of the same voltage
class.
PSC 420 EB
1500–3800 min
PSBC 420 EB
10.8–18 V
1000–3800 min
-1
1.02" (26 mm)
-1