Metal Processing; Emission Levels; Operation; Switch On/Off - Festool CARVEX PSC 420 EB Manual De Instrucciones Original

– Wear suitable protection such as ear protec-
tion, safety goggles, a dust mask for work
which generates dust, and protective gloves
when working with raw materials and when
changing tools.
– Always secure the workpiece in such a man-
ner that it cannot move while being sawed.
– Always connect the machine to a dust ex-
tractor when work involves dust generation.
– Stroboscopic light can cause epileptic
seizures. Do not use this machine if you are
susceptible to epileptic seizures.
– Do not look into the stroboscope light. Look-
ing into the light source can damage your vi-
sion.
5.3

Metal processing

When processing metal, the following
measures must be taken for safety rea-
sons:
– Connect the machine to a suitable dust ex-
tractor.
– Regularly remove dust deposits in the motor
housing.
– Use a metal saw blade.
– Close the chip guard.
Wear protective goggles.
5.4

Emission levels

Levels determined in accordance with EN
60745 are typically:
Sound pressure level
Noise level
Measuring uncertainty
allowance
CAUTION
Operating noise
Damage to hearing
Use ear protection!
Vibration emission value a
three directions) and uncertainty K measured
in accordance with EN 60745:
L = 88 dB(A)
PA
L = 99 dB(A)
WA
K = 3 dB
(vector sum for
h
PSC 420 EB
Sawing wood
Handle a =6,0 m/s
h
K = 2,0 m/s
Gear a =11,0 m/s
h
head
K = 2,0 m/s
Sawing metal
Handle a =7,0 m/s
h
K = 2,0 m/s
Gear a =12,0 m/s
h
head
K = 2,0 m/s
The specified emissions values (vibration,
noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
– They represent the primary applications of
the power tool.
Increase possible for other applications, with
other insertion tools or if not maintained ade-
quately. Take note of idling and downtimes of
machine!
6

Operation

6.1 Changing the battery pack [2]
The cordless jigsaws can be charged using
any Festool battery pack from the BPC
series.
Risk of injury! Always remove the belt
clip from battery packs from the BPC se-
ries prior to use.
6.2

Switch on/off

The electric power tool has one button [1-2]
on each side for switching on/off.
The PSBC 420 EB also has a variable speed
trigger [1-3] with switch lock [1-4]. For con-
tinuous operation, use the button [1-2].
6.3 Charging the battery pack [3]
The battery pack is delivered partially
charged. To guarantee the full battery pow-
er, charge it completely before using it for
the first time.
The charger can be used to charge all Festool
battery packs from the BPS and BPC series as
well as all Protool battery packs from the BP
series.
The LED [3-1] on the charger indicates the
respective operating status of the charger.
C A R V E X GB
PSBC 420 EB
2 2
a =10,0 m/s
h
2 2
K = 2,0 m/s
2
2
2 2
a =11,0 m/s
h
2 2
K = 2,0 m/s
2
2
17