Folding Your Trailer - Burley TRAVOY Manual De Instrucciones Y Seguridad Del Propietario

Folding Your Trailer

1. Remove all cargo and accessories; detach from bike.
2. Fully retract the extendable tow arm.
3. Release the upper frame hinge by rotating the twist handle.
Then unfold the tow bar (Figure 19).
4. Release the middle frame hinge by rotating the twist
handle, then unfold the upper frame (Figure 20).
5. To fold the shelf, first pull the release cable located on
the underside of the lower shelf without pulling up on the
shelf. (Pulling up on the shelf while pulling the release
cable can prevent the release mechanism from fully
releasing). Then pull the shelf toward
the frame (Figure 21).
NOTE: Pushing gently down on the shelf prior to pulling up
may help to fully release the shelf locking mechanism.
6. Fold the kickstand, by rotating the bottom of the
kickstand toward the lower shelf (Figure 22).
7. Store the wheels inside the folded shelf with
the axle side of the wheels facing each other
(Figure 23).
8
ENG
Figure 19
Figure 22
Figure 20
Figure 23
TRAVOY
Figure 21