dirna Bergstrom Bycool compact 1.4 IVECO Instrucciones De Montaje página 27

COMPACT 1.4
EN
Air conditioning for vehicles
Detailed instructions
on power wiring assembly
Wiring
1
supply
A
Take the power supply cable from the equipment through to the vehicle battery, attaching the
1
plastic supports to the rear of the cabin and securing with flanges; then, with the cabin tilted,
pass the cable through the bottom, securing it with clamps and M4 screws; and through to
the battery with flanges; use the same passage as the original cabling (inside the exhaust
pipe protection (A)). (Clean the area thoroughly before attaching the plastic supports). When
the unit is connected to the battery, this will carry out a test of all the LEDs, displaying bd and
then going off.
27