Introduction to the 20FD Series Flat Panel TVs
01
Operating Range for the Remote Control
To control the flat panel TV, point the remote towards the sensor on the panel's bottom right corner. For easy
operation, keep the distance between the remote control and the sensor less than 7m (23 feet) and at an angle of
less than 30 degrees.
7 m
30º
(23 feet)
30º
Sensor
The remote control may not work properly if the sensor is in direct sunlight or very bright lighting. If your viewing
room is naturally bright, change the position of the panel or physically use the remote control closer to the panel's
sensor.
Note: If the remote control is left sitting in direct sunlight or under a very strong light, the case could warp or
deform.
11
En