Temporarily Remove A Block - Pioneer KURO PDP-6020FD Manual De Instrucciones

Basic Operations For Television Viewing
Delete a New Ratings System
If an added ratings system is no longer needed, delete the ratings system from your flat panel TV. It is unnecessary
to remove blocks from individual channels or programs. Deleting the ratings line removes any/all blocks initiated
with that system.
System Setup
1 ) Access the
Parental Control
2 ) Select
Digital Regional Ratings
3 ) Select
RRT Reset
4 ) Select
The message "Reset digital regional ratings?" appears.
OK
5 ) Select .
6 ) Press HOME MENU to exit the menu.
While the Parental Control menu is open, the status display remains unchanged even if the system receives
broadcasts carrying new ratings.

3.5.4 Temporarily Remove a Block

The password entry screen appears when detecting the blocked rating signals (with the picture and sound turned
off). Entering your four-digit password allows you to view the program until your flat panel TV is placed into
Standby or turned Off. To temporarily remove a block, follow the steps below.
1 ) Tune the flat panel TV to the blocked channel.
2 ) Wait for the Block message to appear on screen.
3 ) Enter the four-digit password.
The password window appears. When a four-digit password is entered, or no operation is performed within
60 seconds, the window disappears. To recall the window after it disappears, change the channel or input
source then return before repeating the above steps.
For INPUT 2 (except 480i signals) and INPUT 4 through INPUT 7, the password entry screen appears when
is selected from the Unavailable Ratings menu.
Setup
through the .
from the System Setup menu.
from the submenu.
to delete the new ratings system from the flat panel TV.
Please Input Your Password.
03
Block
51
En