Specify A Digital Hdmi Signal Type; Specify An Audio Hdmi Signal Type - Pioneer KURO PDP-6020FD Manual De Instrucciones

Use Other Equipment With Your Flat Panel TV
In Video mode, the image is over-scanned (enlarged) but the panel automatically switches to PC when receiving
computer signals. In PC mode, the image displays in full size for optimum image quality.

5.2.2 Specify a Digital HDMI Signal Type

For the necessary digital video signal type, check the operating manual that came with the other equipment.
To assign the type of digital signal, follow the steps below.
1 ) Access the Option
2 ) Select HDMI Input
3 ) Select Video from the submenu.
4 ) Select the type of digital video signal recommended for the attached device.
Auto
Color-1
Color-2
Color-3
Color-4
5 ) Press HOME MENU to exit the menu.
If an image fails to appear, specify another digital video signal type. Type parameters other than Auto need to be
checked for natural colorings.

5.2.3 Specify an Audio HDMI Signal Type

For the necessary audio signal type, check the operating manual that came with the other equipment. When
using INPUT 4 or INPUT 5 for HDMI, select the terminal for the desired input source.
To specify the audio type, follow the steps below.
Option
1 ) Access the
HDMI Input
2 ) Select
Audio
3 ) Select from the submenu.
4 ) Select the type of audio signal recommended for the attached device.
Auto
Digital
Analog
5 ) Press HOME MENU to exit the menu.
Video (over-scan)
through the Setup .
from the Option menu.
Type
automatically identifies input digital signals
(default)
Digital Component Video signals (4:2:2) locked
Digital Component Video signals (4:4:4) locked
Digital RGB signals (16 to 235) locked
Digital RGB signals (0 to 255) locked
Setup
through the .
from the Option menu.
Type
automatically identifies input audio signals (default)
accepts digital audio signals
accepts analog audio signals
PC (under-scan)
Description
Description
05
75
En