Display A Graphical Picture/Sound Adjustment Screen - Pioneer KURO PDP-6020FD Manual De Instrucciones

Basic Operations For Television Viewing
• Moving/changing the AV Selection parameter/option stores the option setting in memory (button continues
to work).
Follow the steps below to adjust options for the preferred picture quality.
1 ) Access the Picture
2 ) Select an option.
3 ) Use the TOOLS button to toggle between the previous and adjusted images.
4 ) Repeat Steps 2 and 3 to continue adjusting the option as needed.
5 ) Repeat Steps 2 through 4 to adjust other picture options.
6 ) Press HOME MENU to exit the menu.
Note: if no selections are made within 60 seconds, the menu closes automatically and the current settings are
saved to memory.
To exit the menu without saving the changes, switch to the Before screen then press HOME MENU.

3.4.4 Display a Graphical Picture/Sound Adjustment Screen

Selecting OPTIMUM
On
submenus. Select
Performance provides an on-screen graphic monitor for multiple picture and sound adjustments.
OPTIMUM Performance
OPTIMUM Performance displays on-going picture and sound adjustments using graphical data when selecting
OPTIMUM from the AV Selection menu. OPTIMUM Performance provides the following bar graph data:
• Analyzer: Histogram, RGB, Room Light
• Picture: Contrast, Brightness, Color, Sharpness, Color Temp., Gamma
• Sound: Level
OPTIMUM Performance
[OPTIMUM] On
OPTIMUM On/Off
To display OPTIMUM Performance, follow the procedure below.
Picture
1 ) Access the
AV Selection
2 ) Select
3 ) Select OPTIMUM
4 ) Select OPTIMUM Performance
The OPTIMUM Performance appears. To cancel the OPTIMUM Performance option, press
Note: When OPTIMUM is selected, press and hold
Performance.
OPTIMUM Performance compares the picture and sound quality between "Off" (unadjusted) and "On"
(adjusted using the
through the Setup .
from the AV Selection menu causes the Picture menu to display different AV source
for the Sound Control option to automatically adjust the sound quality, and OPTIMUM
[Analyzer]
Histogram
RGB
Room Light
Setup
through the .
from the Picture menu.
from the AV Selection menu.
from the Picture menu.
button).
TOOLS
[Picture] Contrast
Brightness
Color
Sharpness
Color Temp
Gamma
on the remote control to show OPTIMUM
DISPLAY
[Sound]
60 1k 12k(Hz)
.
EXIT
03
45
En