Skip Or Delete Unwanted Channels - Pioneer KURO PDP-6020FD Manual De Instrucciones

Basic Operations For Television Viewing
03

3.2.6 Skip or Delete Unwanted Channels

The Auto Installation process adds all channels available from your TV service provider. However, there may be
some channels that are unwanted or are not age-appropriate for your home. This section explains how to bypass
or delete unwanted channels when moving up/down one channel at a time and what programs are available for
viewing.
To skip or delete unwanted channels, use the remote's CH+/CH– buttons to reset the status for those channels.
Follow the steps below to change a channel's status.
1 ) Access the
Digital Tuner Setup
2 ) Select
• Digital TV channels: Channel management > Channel Options >
3 ) Scroll to or highlight an unwanted channel number.
4 ) Press ENTER to reverse the status for that channel.
When there is a check mark next to the channel, it disappears.
5 ) Press RETURN.
A confirmation screen appears.
Yes
6 ) Select
The Channel Delete setting is complete.
7 ) Press HOME MENU to exit the menu.
If you select the
Options menu (no confirmation screen appears). Skip Steps 5 and 6.
The instructions for restoring a skipped channel are the same as above. In Step 4 a check mark appears next to
the added/restored channel.
To skip an analog channel, follow the steps below.
• Analog TV channels: Manual Adjust > Store > No
Radio Skip
This function allows skipping of radio channels at a time. To set this option, follow the steps below.
1 ) Access the
Digital Tuner Setup
2 ) Select
Channel management
3 ) Select
Radio Skip
4 ) Select
On
5 ) Select
6 ) Press HOME MENU to exit the menu.
38
En
System Setup
through the
Analog TV Setup
or
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
then press ENTER.
(Channel Skip) option in Step 3, the setting is complete when exiting the Channel
System Setup
through the
from the System Setup menu.
from the Digital Tuner Setup menu.
from the Channel management menu.
.
Setup
.
from the System Setup menu.
00001.000
00002.000
00003.000
00004.000
00005.000
00006.000
00007.000
00008.000
00009.000
Setup
.
(Channel Delete) > (On)