BDS Maschinen MAB 1300 Instrucciones De Manejo página 9

R i s k o f i n j u r y
M A B 1 3 0 0
W A R NING
Im p r o p e r h a n d l i n g o f t h e m a c h i n e i n c r e a s e s t h e r i s k o f
i n j u r y !
Observe the following safety precautions to avoid injuring
yourself and/or others:
► Operate the machine only with the protective equipment
stipulated in these operating instructions (see section
Personal protective equipment) .
► Do not wear protective gloves when the machine is running .
A glove can be caught by the drilling machine and torn off
the hand. Risk of losing one or more fingers.
► Remove loose jewellery before beginning work . Wear a hair
net if you have long hair .
► Always switch off the machine before changing tools,
performing maintenance or cleaning . Wait until the machine
has come to a complete standstill .
► Always remove the plug from the mains socket before
changing tools, cleaning or performing maintenance, in
order to avoid unintentional starting of the machine .
► Do not put your hand into the machine while it is in
operation . Remove shavings only when the machine is at a
standstill . Wear protective gloves when removing swarf .
► When working on scaffolding, the operator must be secured
with a safety belt as the machine can oscillate dangerously
in the event of interruption to the power supply .
► Check for secure clamping of the electromagnets on the
substrate before every use (see section Preparing) .
► Secure the machine with the safety belt supplied when
working from an inclined or vertical position or during
overhead work . The machine could fall down if the magnet is
loosened or the power fails .
► Check that the tool is tightened securely before using (see
section Inserting the tool) .
► Do not allow the connecting cable to hang over edges
(danger of tripping) .
Sa f e t y
9