Preventing Damage; Transporting The Machine - BDS Maschinen MAB 1300 Instrucciones De Manejo

Sa f e t y
P r e v e n t i n g d a m a g e
T r a n s p o r t i n g t h e m a c h i n e
1 0
CAUTION
P o t e n t i a l d a m a g e t o p r o p e r t y i f t h e m a c h i n e i s i m p r o p e r l y
u s e d !
Observe the following instructions to avoid damage:
► Before connecting the machine, compare the connection
data (voltage and frequency) on the rating plate with those
of your mains power supply . The data must correspond in
order to avoid damage to the machine .
► Always use the handle to carry the machine and not the
connecting cable .
► Do not pull the mains cable to remove the plug from the
mains socket .
► Do not crush the connecting cable .
► Do not expose the connecting cable to heat or chemical
liquids .
► Do not pull the connecting cable across sharp edges or hot
surfaces .
► Lay the connecting cable in such a way that it cannot be
caught and wound up in the rotating part of the machine .
W A R NING
D a n g e r r e s u l t i n g f r o m
Due to the heavy weight of the machine, observe the following
instructions
► Transport the machine only with suitable transport material .
► Lifting the machine manually should be carried out by two
persons .
► When transporting the machine with a crane, use suitable
lifting devices . Pay attention to the carrying capacity of the
lifting device .
h e a v y w e i g h t o f t h e m a c h i n e !
M A B 1 3 0 0