The Hotplates; Residual Heat Indicator; Programming The Hob; Switching The Hob On And Off - NEFF T4.E10 Serie Instrucciones De Uso

Control panels Function
Main switch
#
Select power level
/
A @
Time program
3
Childproof lock/Basic settings
‚
Powerboost
@˜
Cleaning lock
"

The hotplates

Hotplate
Single hotplate
$
Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.
To switch on: press the
#
main switch lights up. The hob is ready for use.
To switch off: press the #
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.

Set the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
26
Turning on and off
Always use cookware of a suitable size.
symbol. The indicator above the
symbol until the indicator above the
Indicators
Power levels
-
‚ Š
Residual heat
/
• œ
Time program function
‹‹
Cooking time
x
Timer
W
Powerboost function
˜
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
The settings will not change if several symbols are pressed at
■
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
■
proper functioning.
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Selecting the power level:
The hob must be switched on.
Press the + or - symbol of the required hotplate. The
1.
symbol lights up on the display.
In the next 10 seconds, press the + or - symbol. The basic
2.
setting will appear.
+ symbol = power level 9.
- symbol = power level 4.

To change the power level, press the + or - symbol until the
3.
required power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
/ light will remain on as long as
œ •

appears. The hotplate turns off
‹
œ / •
‹