Using The Speaker Mode; Switching To Mute - Siemens Gigaset C590 Manual De Instrucciones

Making calls
or
Ø«Ú
9725551234
à
Silence
1 Ringtone icon
2 Caller name or number
The following displays in place of the
number:
u
External, if no number is transmitted.
u
Unavailable, if the caller has not
requested Calling Line Identification
(CID).
Display with CID
If you have CID, then the name that is regis-
tered with your network provider for the
caller's number will also display. If the
number of the caller is stored in your direc-
tory, the corresponding directory entry
replaces the CID display.
Ø«Ú
9725551234
Anna Fielding
Accept Silence
1 Caller's number
2 Caller's name
The display shows:
u
External, if no number is transmitted.
u
Unavailable, if the caller has not
requested Calling Line Identification
(CID).
28
Gigaset C595
1
2
1
2

Using the speaker mode

In speaker mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows others to participate in the call.
Activating/deactivating speaker
mode
Activating while dialing
~ d
Enter the number and press the
speaker key.
¤
You should inform your caller before you
use the speaker function so that they
know someone else is listening.
Switching between earpiece and
speaker mode
d
Press the speaker key.
During a call and when listening to the
answering machine (Gigaset C595 only),
activate or deactivate speaker mode.
To place the handset in the base/charging
cradle during a call:
¤
Press and hold the speaker key d while
placing the handset in the base.
For instructions on how to adjust the
¢
speaker volume (

Switching to mute

You can deactivate the microphone in your
handset during an external call.
h
Press key to mute the handset.
The display shows Microphone
is off.
Press the key again to reactivate
the microphone.
Please note
If the telephone is muted the only keys
that will function on the handset are the
mute key h and the end-call key a.
.
page 49).