Use Of The Tilt-Swivel; Damper Wire; Specifications - Sony VRT17-WA Manual De Instrucciones

Use of the Tilt-Swivel

With the tilt-swivel, this unit can be adjusted to be viewed
at your desired angle within 90° horizontally and 20°
vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands as illustrated below.

Damper Wire

Using a white background, very thin horizontal stripes on
the screen are visible as shown below. These stripes are
damper wires. These wires are attached to the aperture
grille inside the Trinitron tube and are there to damp
vibrations of the aperture grille in order to prevent them
from influencing to the picture quality.
Damper wire

Specifications

Picture tube
Video image area
Resolution
Standard image area
Deflection frequency
AC input voltage/current
Power consumption Max. 140 W
Dimensions
Mass
Design and specifications are subject to change without
notice.
Approx. 6 cm
Approx. 6 cm
0.26 mm phosphor trio pitch
17 inches measured diagonally
(16" visual)
90-degree deflection
Approx. 328 × 242 mm (w/h)
(13 × 9
5
/ inches)
8
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Approx. 300 × 225 mm (w/h)
× 8
(11 7 / 7 / inches)
8 8
or
Approx. 293 × 234 mm (w/h)
× 9
(11 5 / 1 / inches)
8 4
Horizontal: 30 to 85 kHz
Vertical: 48 to 150 Hz
100 to 120 V, 50/60 Hz, 1.7 A
220 to 240 V, 50 – 60 Hz, 1.2 A
403.6 × 426.3 × 450 mm (w/h/d)
(16 × 16 × 17
7 3
/ / inches)
8 4
Approx. 20 kg (44 lb)
EN
11