Helmet Holder - Honda NT700V Manual Del Propietário

HELMET HOLDER

The helmet holder is located below the
seat. Remove the seat (page 57). Hang the
helmet on the holder hook (1). Install the
seat and lock it securely.
To install the two helmets on the helmet
holder, use the helmet set wire (2) stored in
the tool bag and place it on the hook.
WARNING
Riding with a helmet attached to the
holder can interfere with the rear wheel
or suspension and could cause a crash
in which you can be seriously hurt or
killed.
Use the helmet holder only while parked.
Do not ride with a helmet secured by the
holder.
58
(1) Holder hook
(2) Helmet set wire
E